本系列详细参数下载(PDF版) This series of detailed parameters Download (PDF version)

选型、安装、使用、维护等 需要注意的事项 Need to pay attention selection, installation, use, maintenance, etc.

Product Overview： 

Mainly by the compression of the driving wheel device, Friction drive mechanism, speed control mechanism. 
1, high strength: the impact of negative plant or machine turns, the machine performance and reliability, precision turning, recoilless. 
2, speed range: variable speed range is 5, the output speed can be varied from 1:1.45 to 1:7.25. 
3, high speed accuracy: speed accuracy of 0.5 - 1 turn. 
4, stable performance: transmission components of the machine have been a special heat treatment, precision machining Mount Sassafras, well-oiled, smooth running, low noise, long life. 
5, coaxial structure: an input shaft, an output shaft rotating in the same direction, small size and light weight. 
6, the combination of capability: This machine can be used with all types of gear combinations to achieve the effect of a low gear speed, large torque regulation, with good adaptability. 
7, under the circumstances permitted load, adjusting to constant speed; 
8, the whole machine seal, suitable for wet, dusty, mildly corrosive environment.

Technical Parameters：

Power：0.18KW～7.5KW
Torque：1.5Nm～2062Nm 

Speed range：

1、Basic：200-1000r/min
2、Stage gearbox with gear reducer（i=2-5）：40-200r/min
3、Transmission with two gear reducer（i=8-25）：8-125r/min

MB CVT models：

MB02、MB04、MB07、MB15、MB22、MB40、MB55、MB75