Routine maintenance reducer Please note the following:
1.Keep equipment in and around the venue　clean, no　sub- plot , no grease .
2.There is tantamount to pay attention to the sound of gear in operation .
3.Check all the normal vibration, temperature is in compliance with regulations.
4.Observe the speed reducer , under the joint surface and the shaft , with or without oil leakage , if any leaks promptly eliminated.
5.Or oil through the oil gauge mirror , check the oil level should be at a predetermined position , strictly enforce the " three filters " when refueling.

Reducerperiodic maintenance please note the following:
1,reducer should be regularly cleaned equipment and other devices , strict adherence to rules , and remove small defects reducer , such as loose fasteners and so on.
2, check the note gear under normal load, if there is abnormal vibration . Each bearing temperature gauges indicate normal, oil lubrication system pressure, flow meets the requirements, equipment or without abnormal noise, mechanical and electrical parts without odor .
3 , a long down time reducer , attention should be immersed in dust and rust generation of at least a month , and a start gear , each run about 1 hour , and through the observation window and the side cover rusting was observed in the gear and bearing bracket .